When an e‑stim unit stops working in a nursing home rehab gym, the repair request comes straight to your team.
Put a QR tag on every e‑stim unit, ultrasound, diathermy unit and exercise cycle you place in skilled nursing facilities. A therapist scans it with a phone camera, picks what’s wrong, and the request goes to the team that covers that building. There’s no app to install and no login, so the therapist is back with residents in a minute.
One regional LTC pharmacy handled nearly 6,000 repair requests on ServiceTags between March 2022 and November 2026. High‑priority requests close in a median of 1.4 hours.
- repair requests handled
- ~6,000
- median close, high priority
- 1.4 h
How does a therapist report a broken e-stim unit to the equipment company?
They scan the tag on the unit. The phone opens your request form for that one unit, with nothing to download and no account to make. They pick the problem, add a photo of the screen if it helps, and send it. Before anyone at your company reads it, the request already says which unit, which facility and which team.
Scan the tag.
Any phone camera works. The page shows your company’s logo, so staff can tell your machine from the facility’s own and from another vendor’s.
Pick what’s wrong.
You write the forms. An e‑stim unit can ask about power and lead wires, an exercise cycle about resistance and the display.
It reaches the right team.
The request goes to the team that covers that facility by email, text or push, and escalates if nobody picks it up.
If the unit already has an open request, staff see it first and can follow that one instead of reporting the same error code again the next day.
See exactly what staff see when they scanTherapy Equipment Request
Cedar Ridge Care Center · Rehab gym · ES-0207
What’s wrong with this unit?
What can a rehab equipment program put a tag on?
Anything you own that sits in a rehab gym or therapy room and can stop working. Each facility includes 25 tagged assets, pooled across your account, so the smaller modalities can carry tags along with the big machines.
- Electrical stimulation units
- Won’t power on, lead wires, error codes
- Ultrasound and combo units
- No output, damaged applicator, display errors
- Shortwave diathermy
- Won’t start, damaged cables, error codes
- Exercise cycles and recumbent steppers
- Resistance stuck, dead display, seat won’t adjust
- Treatment and hi-lo tables
- Height won’t change, pedal or motor trouble
- Hot pack and paraffin units
- Not heating, leaking, thermostat
Calibration stays where it is. Repairs come to you in between.
ServiceTags doesn’t schedule calibration or preventive maintenance, and it doesn’t store calibration records. Your calibration schedule stays in the system you use now. What ServiceTags adds is the part between visits: a therapist finds a unit that won’t work, and the request reaches your team with the unit’s ID and facility attached.
Each unit keeps its repair history, so a tech who scans the tag on the next visit sees everything reported since the last one.
One queue, routed by facility.
How does each request reach the right team?
By facility. Each nursing home you serve belongs to one of your teams, split by region or however you divide the work. A request from that building goes to that team by email, text or push, and escalates if it sits open.
Scan from
Cedar Ridge Care Center
- Ohio team64 facilities
- Indiana team41 facilities
- Michigan team52 facilities
Can our own techs and office file requests too?
Yes. A tech can file for a facility during a visit, and your office can file when a rehab director calls. Their requests land in the same queue as the scans and route the same way.
- E-stim won’t power onCedar RidgeScan
- Cycle display flickersWillow BendTech
- Swap ultrasound unitOak HollowOffice
- Hot pack unit not heatingMaple CourtScan
What does the rehab director see when it’s fixed?
The tech records what they found and what they did, and the request closes. Staff can follow it from the page they reported on, and a form rule can email them when it’s done. Every unit keeps a dated history, so when a rehab director asks what happened to the e‑stim unit, you can show them.
US-0319 · history
- Oct 21Won’t power on. Replaced power supply.
- Jul 30Lead wire frayed. Replaced lead wire set.
- Apr 12Error code E4. Reseated board, tested OK.
How is this different from a CMMS, or from phone and fax?
A CMMS like MaintainX or UpKeep is built for teams that run their own buildings. Requesters get accounts, and scheduled preventive maintenance is the center of the product. ServiceTags doesn’t schedule PM.
Phone, fax and email do reach you, but they rarely say which unit, and someone still has to work out which team covers that building. A tag tells you both before anyone picks up the request.
What does ServiceTags cost a rehab equipment program?
From $500 a month, including your first 25 facilities. Users are unlimited, so every dispatcher and tech can see the requests.
From
$500a month
including your first 25 facilities
- Lower per-facility rates as you add more
- 25 tagged assets per facility included, pooled across your account
- Unlimited users and requests
- Durable tags $2 each, free shipping on 50 or more. Or print your own on standard label sheets
- 60-day pilot on 10 to 25 facilities: $1,000, setup included
What rehab equipment programs ask first.
How does a therapist report a broken e-stim unit to the equipment company?
They scan the QR tag on the unit with a phone camera and pick what’s wrong. There’s no app and no login. The request goes to the team that covers that facility, already tied to that unit.
Does ServiceTags schedule calibration or preventive maintenance?
No. Calibration and PM schedules stay in the system you use now. ServiceTags handles repair requests between visits and keeps each unit’s repair history.
Do therapists need an account?
No. They never sign up, download anything or remember a password.
Can contract therapy staff report, or only facility employees?
Anyone standing at the unit can scan the tag and report. It doesn’t matter who employs them.
Does it show where a unit is right now?
No. ServiceTags records which facility each unit is assigned to, its status and its history. It isn’t GPS. When you move a unit, change its facility in the dashboard.
What does setup involve?
We import your facilities and equipment, route each facility to its team and ship your tags. Your team pairs each tag to its asset in the app and sticks it on.
Is there a free trial?
No. You start with a 60-day pilot on 10 to 25 facilities for $1,000 flat, setup included. Tags are $2 each. If you sign for a year, the $1,000 comes off the first year's bill.
See it with your own facilities.
Bring a list of the nursing homes you serve and what you've placed in them. On a 30-minute call, we'll look at how your teams split those facilities and route a test request end to end. If it fits, start with a 60-day pilot on 10 to 25 facilities for $1,000. We do the setup.
Or scan a demo tag and send a test request.