When an IV pump or feeding pump fails in a nursing home you supply, the request comes straight to your team.
Put a QR tag on every infusion pump and enteral feeding pump you rent or place in skilled nursing and long-term care facilities. A nurse scans it with a phone camera, picks what’s wrong, and the request goes to the team that covers that facility, tied to that pump. There’s no app to install and no login.
One regional LTC pharmacy handled nearly 6,000 repair requests on ServiceTags between March 2022 and November 2026. High‑priority requests close in a median of 1.4 hours.
- repair requests handled
- ~6,000
- median close, high priority
- 1.4 h
How do nurses report a broken IV pump to the infusion pharmacy?
They scan the tag on the pump. The phone opens your request form for that one pump, with nothing to download and no account to make. They pick the problem, add a photo of the error on the screen if it helps, and send it. Before anyone at your company reads it, the request already says which pump, which facility and which team.
Scan the tag.
Any phone camera works. The page shows your company’s logo, so nurses can tell your pump from the facility’s own and from another supplier’s.
Pick what’s wrong.
You write the forms. An IV pump and a feeding pump can ask different questions, and either can offer "Swap this pump" or "Ready for pickup".
It reaches the right team.
The request goes to the team that covers that facility by email, text or push, and escalates if nobody picks it up.
If the pump already has an open request, nurses see it first and can follow that one instead of reporting the same alarm again on the next shift.
See exactly what staff see when they scanPump Service Request
Cedar Ridge Care Center · 3 North · IVP-2093
What’s wrong with this pump?
What can a pump supplier put a tag on?
Every pump you own that sits in a facility, plus the gear that keeps it running. Each facility includes 25 tagged assets, pooled across your account.
- Large-volume infusion pumps
- Door won’t latch, alarms that won’t clear, won’t power on
- Ambulatory infusion pumps
- Battery won’t hold a charge, keypad, error codes
- Enteral feeding pumps
- Set errors, won’t hold a charge, dead display
- IV poles and pump clamps
- Clamp won’t hold, wheels, bent pole
- Chargers and power supplies
- Missing, frayed cords, won’t charge
- Pump carry bags and mounts
- Torn straps, broken brackets
PM stays in your biomed system. The swap request comes to you.
ServiceTags doesn’t schedule PM or calibration, and it doesn’t store inspection records. It handles the failures between visits. Many suppliers swap a failing pump rather than fix it on site, so the request tells you which pump to bring back before the driver leaves.
The tag stays on the pump, so its repair history follows it from facility to facility. ServiceTags records the facility you assign, not a live location.
One queue, routed by facility.
How does each request reach the right team?
By facility. Each nursing home you supply belongs to one of your teams, split by region, by route or however you divide the work. A request from that building goes to that team by email, text or push, and escalates if it sits open. Urgent requests can follow a rule of their own.
Scan from
Cedar Ridge Care Center
- Central team47 facilities
- East team63 facilities
- West team35 facilities
Can our drivers and pharmacy staff file requests too?
Yes. A driver can file for a facility during a delivery, and pharmacy staff can file when a nurse calls in. Their requests land in the same queue as the scans and route the same way.
- IV pump door won’t latchCedar RidgeScan
- Charger missingWillow BendDriver
- Pick up feeding pumpOak HollowPharmacy
- Feeding pump set errorMaple CourtScan
What does the nurse see when it’s handled?
The tech records the repair or the swap, and the request closes. Staff can follow it from the page they reported on, and a form rule can email them when it’s done. Every pump keeps a dated history, so when a director of nursing asks about the pump on 3 North, you can show them.
EFP-0457 · history
- Nov 07Door won’t latch. Swapped pump, sent to biomed.
- Aug 22Won’t hold a charge. Replaced battery.
- May 15Missing charger. Delivered new charger.
How is this different from a CMMS, or from phone and fax?
A CMMS like MaintainX or UpKeep is built for teams that run their own buildings. Requesters get accounts, and scheduled preventive maintenance is the center of the product. ServiceTags doesn’t schedule PM.
Phone, fax and email do reach you, but they rarely say which unit, and someone still has to work out which team covers that building. A tag tells you both before anyone picks up the request.
What does ServiceTags cost a pump supplier?
From $500 a month, including your first 25 facilities. Users are unlimited, so every dispatcher, driver and tech can see the requests.
From
$500a month
including your first 25 facilities
- Lower per-facility rates as you add more
- 25 tagged assets per facility included, pooled across your account
- Unlimited users and requests
- Durable tags $2 each, free shipping on 50 or more. Or print your own on standard label sheets
- 60-day pilot on 10 to 25 facilities: $1,000, setup included
What pump suppliers ask first.
How do nurses report a broken IV pump to the infusion pharmacy?
They scan the QR tag on the pump with a phone camera and pick what’s wrong. There’s no app and no login. The request goes to the team that covers that facility, already tied to that pump.
Does ServiceTags schedule PM or calibration for pumps?
No. PM and calibration stay in your biomed system. ServiceTags handles repair requests between visits and keeps each pump’s repair history.
Is this for device incident reporting?
No. ServiceTags is for repair requests on your equipment. Incidents involving a resident still go through your own reporting process.
Do nurses need an account?
No. They never sign up, download anything or remember a password.
Does it show where a pump is right now?
No. ServiceTags records which facility each pump is assigned to, its status and its history. It isn’t GPS. When a pump moves, change its facility in the dashboard.
What does setup involve?
We import your facilities and equipment, route each facility to its team and ship your tags. Your team pairs each tag to its asset in the app and sticks it on.
Is there a free trial?
No. You start with a 60-day pilot on 10 to 25 facilities for $1,000 flat, setup included. Tags are $2 each. If you sign for a year, the $1,000 comes off the first year's bill.
See it with your own facilities.
Bring a list of the nursing homes you serve and what you've placed in them. On a 30-minute call, we'll look at how your teams split those facilities and route a test request end to end. If it fits, start with a 60-day pilot on 10 to 25 facilities for $1,000. We do the setup.
Or scan a demo tag and send a test request.