When a dryer stops heating or an ice machine quits in a nursing home, the request comes straight to your service team.
Put a QR tag on every washer, dryer, ice machine and dispenser you place and maintain in nursing homes and assisted living. Housekeeping, laundry or dietary staff scan it with a phone camera, pick what’s wrong, and the request goes to the team that covers that building, tied to that machine. There’s no app to install and no login.
One regional LTC pharmacy handled nearly 6,000 repair requests on ServiceTags between March 2022 and November 2026. High‑priority requests close in a median of 1.4 hours.
- repair requests handled
- ~6,000
- median close, high priority
- 1.4 h
How do nursing home staff report a broken washer or dryer to the laundry company?
They scan the tag on the machine. The phone opens your request form for that one machine, with nothing to download and no account to make. They pick the problem, add a photo of an error code or a leak if it helps, and send it. Before anyone at your company reads it, the request already says which machine, which facility and which team.
Scan the tag.
Any phone camera works. The page shows your company’s logo, so staff know whose machine it is and who to tell.
Pick what’s wrong.
You write the forms. A dryer can ask about heat and the drum, an ice machine about output and leaks.
It reaches the right team.
The request goes to the team or route that covers that building by email, text or push, and escalates if nobody picks it up.
If the machine already has an open request, staff see it first and can follow that one instead of reporting the same dryer again on every shift.
See exactly what staff see when they scanLaundry Equipment Request
Cedar Ridge Care Center · Laundry room · DR-0342
What’s wrong with this machine?
What can a laundry or ice vendor put a tag on?
Every machine you own or service in the building. Each facility includes 25 tagged assets, pooled across your account, so the dispensers and card readers can carry tags along with the big machines.
- Commercial washers
- Won’t drain, won’t spin, door lock, leaks
- Dryers
- Not heating, won’t start, drum won’t turn
- Ice machines
- Not making ice, leaking, slow to fill
- Ice and water dispensers
- Won’t dispense, leaking, jammed chute
- Card readers and coin boxes
- Card won’t read, machine won’t start after paying
- Laundry chemical dispensers
- Not dispensing, leaking lines
A nursing home can’t wait until Monday for a washer.
A nursing home runs laundry every day. When a washer goes down, linens and residents’ clothing back up within a shift. When an ice machine quits, the kitchen and the aides doing water pass feel it right away. The staff who notice work every shift, including nights and weekends.
A tag on the machine lets any of them report it the moment it happens, instead of leaving a note for the administrator to call you on Monday.
One queue, routed by facility.
How does each request reach the right team?
By facility. Each building you serve belongs to one of your teams or routes, however you divide the work. A request from that building goes to that team by email, text or push, and escalates if it sits open.
Scan from
Cedar Ridge Care Center
- North team58 facilities
- Metro team83 facilities
- South team46 facilities
Can our route techs and office file requests too?
Yes. A route tech can file for a facility during a visit, and your office can file when an administrator calls. Their requests land in the same queue as the scans and route the same way.
- Dryer not heatingCedar RidgeScan
- Washer door seal wornWillow BendTech
- Ice machine slow to fillOak HollowOffice
- Card reader won’t readMaple CourtScan
What does the facility see when it’s fixed?
The tech records what they found and what they did, and the request closes. Staff can follow it from the page they reported on, and a form rule can email them when it’s done. Every machine keeps a dated history, so when an administrator asks how often dryer 2 has been down, you can show them.
IM-0118 · history
- Nov 02Not heating. Replaced heating element.
- Sep 11Won’t start. Replaced door switch.
- Jun 27Leaking. Replaced drain hose.
How is this different from a CMMS, or from phone and fax?
A CMMS like MaintainX or UpKeep is built for teams that run their own buildings. Requesters get accounts, and scheduled preventive maintenance is the center of the product. ServiceTags doesn’t schedule PM.
Phone, fax and email do reach you, but they rarely say which unit, and someone still has to work out which team covers that building. A tag tells you both before anyone picks up the request.
What does ServiceTags cost a laundry or ice vendor?
From $500 a month, including your first 25 facilities. Users are unlimited, so every dispatcher and route tech can see the requests.
From
$500a month
including your first 25 facilities
- Lower per-facility rates as you add more
- 25 tagged assets per facility included, pooled across your account
- Unlimited users and requests
- Durable tags $2 each, free shipping on 50 or more. Or print your own on standard label sheets
- 60-day pilot on 10 to 25 facilities: $1,000, setup included
What laundry and ice vendors ask first.
How do nursing home staff report a broken washer or dryer to the laundry company?
They scan the QR tag on the machine with a phone camera and pick what’s wrong. There’s no app and no login. The request goes to the team that covers that facility, already tied to that machine.
Is ServiceTags only for medical equipment?
No. It works for any equipment you own or service in care facilities you don’t run. Washers, dryers and ice machines work the same way as med carts.
Can residents report a problem in an assisted living laundry room?
Yes. Anyone with a phone camera can scan the tag. You choose what the form asks.
Does ServiceTags schedule preventive maintenance or filter changes?
No. ServiceTags handles repair requests and keeps each machine’s history. PM and filter schedules stay in the system you use now.
Do staff need an account?
No. They never sign up, download anything or remember a password.
What does setup involve?
We import your facilities and equipment, route each facility to its team and ship your tags. Your team pairs each tag to its asset in the app and sticks it on.
Is there a free trial?
No. You start with a 60-day pilot on 10 to 25 facilities for $1,000 flat, setup included. Tags are $2 each. If you sign for a year, the $1,000 comes off the first year's bill.
See it with your own facilities.
Bring a list of the nursing homes you serve and what you've placed in them. On a 30-minute call, we'll look at how your teams split those facilities and route a test request end to end. If it fits, start with a 60-day pilot on 10 to 25 facilities for $1,000. We do the setup.
Or scan a demo tag and send a test request.